My warthog joystick is FIXED
I contacted TM Support, they sent me a PDF disassamebly guide.
The problem was 100% same as this --> https://forums.eagle.ru/showpost.php?p=2679381&postcount=21
3x wires broken: orange, yellow and brown.
SOLUTION;
* At the bottom of the Joystick, unscrew the 4x screws.
* A small PCB is expoised, remove the lefthandconnector
* unscrew the DIN-connector
* Push the removed white connector up into the base so it pushes the DIN upwards out of its place.
* Now your exposed the wiring.
* Get the soldering iron and some solder.
* Resolder the broken wires.
* Test.. using the Firmware Uploader
Literally.. within 5 minutes it was fixed.
SHAME!!! on thrustmaster such a fekking expensive stick and half-assed solderwork. Geeezes. What about ppl who dont have soldering skills?? I mean then your screwed.
fixed using this image.
(http://i.imgur.com/pnF3Q1x.jpg)
and this one helps too
(http://rr-m.org/blog/wp-content/uploads/2015/04/txrw_1_13.jpg)
see also --> https://forums.eagle.ru/showthread.php?t=150889